Oriental Motors
Go to Oriental Motor web site
Oriental Alpha DC stepper motor AS Series Stepping Motors
The AlphaStep is a revolutionary hybrid stepping motor and driver package which eliminates missed steps. The AlphaStep uses a built-in feedback device that constantly monitors the motor shaft position to detect and correct for loss of synchronism.
  • AC input
  • Frame sizes from 1.65 in to 3.54 in
  • Maximum holding torque from 2.63 lb-in to 320 lb-in
  • Permissible speed range from 0 to 4000 r/min
   
Oriental stepping motors RK Series Stepping Motors
The RK series offers both the high resolution and smooth motion of a 5-phase microstepping system with the simplicity of a full step system. The RK series "Smooth Drive" function achieves low vibration without the need for a higher cost pulse generator.
  • AC input
  • Frame sizes from 1.65 in to 3.54 in
  • Maximum holding torque from 1.15 lb-in to 320 lb-in
  • Permissible speed range from 0 to 4000 r/min
   
Oriental stepping motors
CSK5 Series Stepping Motors
The CSK series combines a 5-phase stepping motor and a 24VDC input board-level driver to provide high torque, high resolution and low vibration in a compact package.
  • DC input
  • Frames sizes from 1.65 in to 3.35 in
  • Maximum holding torque from 1.2 lb-in to 55.6 lb-in
  • Permissible speed range from 0 to 2500 r/min
   
Oriental Stepping Motors UMK Series Stepping Motors
The UMK series provides high torque and low vibration. High resolution models are available.
  • AC input
  • 1.65 in and 2.22 in frame sizes
  • Maximum holding torque from 1.4 lb-in to 11.9 lb-in
  • Permissible speed range from 0 to 4000 r/min
   
Oriental Motors AC speed controls ES Series AC Sped Controls
The ES01 and ES02 speed controllers are designed for ease of use and operation. A wide range of speed control motors are available with these controllers.
  • Frame sizes from 2.36 in to 3.54 in
  • Output power from 1/125 HP (6 W) to 1/8 HP (90 W)< 350 to lb-in 0.44 from torque>
  • Variable speed range from 0.25 r/min to 1600 r/min
   
Oriental DC Brushless speed controls

BLF Series Brushless DC
The BLF Series combines the attractive features of a brushless DC motor, such as compact size, high output, flat torque, excellent speed stability and energy-saving design, with exciting new enhancements that include a wider speed range and multi-speed operation. Using the digital operator, you can draw the maximum performance out of this feature-rich BLF Series with ease.

  • AC Input
  • Frame sizes from 2.36 in. to 3.54 in.
  • Output power from 1/25 HP (30W) to 1/6 HP (120W)
  • Rated torque from 0.89 lb-in to 601 lb-in
  • Variable speed range from 0.4 to 4,000 rpm
  • Hollow shaft flat gearhead models available


links
- Accu-Sort
- Advantech
- Alpha Gearing
- Ametek
- ANDON Boxes
- Animatics
- Aro
- Aromat
- Baldor
- Balogh
- Balluff
- Banner
- Break-A-Beam
- Contrex
- Danfoss
- Dongan
- Electra Gear
- Electrol
- EXOR
- Federal Signal
- Fincor
- Finder Relays
- Formsprag
- Furnas-Siemens
- Gemco
- Haewa
- Hammond
- Hub City
- IMS
- InterlinkBT
- Item
- K-B Electronics
- Kubler
- Larco
- Magne Power
- Mead
- Meltric
- Mijno
- Moeller Electric
- Morat
- Newton Labs
- Neugart
- Nexen
- Omron
- Oriental Motor
- Panasonic
- Patriot Sensors
- Perfection Gear
- Red Lion
- Rollon
- STM
- Saftronics
- SECO
- Sentrol
- SEW Eurodrive
- Shimpo
- Siemens
- Simco Static
- Static Controls
- Superior Electric
- Sunx
- TURCK
- WAGO
- Warner Electric
- T.B. Woods
- Xycom
- Zero Max

adBanner
HOME  |   Contact Us  |   About Simco  |   Our Products  |   Our Manufacturers