Animatics smart motor
Click Here to go to Animatics web site.
 
The possibilities are limitless! Our SmartMotor™ suite of products provide a wide range of capabilities, sizes, and functionality, all offering the flexibility and power of our fully-integrated, closed loop servo technology. The Animatics development team can work with you to design and produce a creative solution to all of your motion control needs.
The Animatics SmartMotor has internal, non-volatile memory that allows for programs to be downloaded from a host computer and saved to the SmartMotor. An entire system’s tuning and performance parameters can be saved and replicated from the first to the last axis. All input, output, and internal status information is accessible through defined variables for program monitoring and control.

Up to 100 axes of SmartMotors can be networked together through a variety of field buses, including RS485, ProfiBus, and DeviceNet. SmartMotors can communicate with serially addressable devices on the network; for example, intelligent peripherals such as light curtains, bar code readers, and absolute encoders. Sensors, monitoring an array of events, can be connected and controlled directly from the SmartMotor. It is this efficient and flexible technology that drives our success.
 

Control
Coordinated motion
An array of SmartMotors can be daisy-chained over RS232 or linked by RS485 to coordinate motion and automate multi-axis machines. You can control position, velocity, and acceleration to within 32-bits of resolution to handle the most demanding of applications.

Torque and velocity control
Due to the SmartMotor’s low cost, it is an excellent choice even for simple torque or velocity control. In Torque Mode, the SmartMotor is a source of highly-controllable continuous torque, completely independent of position. In Velocity Mode, velocity is held to within a fraction of a percent. Velocity, acceleration, and deceleration can be modified on-the-fly.

Encoder following and electronic gearing

The SmartMotor follows an external encoder with virtually any gearing ratio that is configured in the application software. While the motor is performing electronic gearing, it can also run its internal program interpreter and talk to peripherals. Alternatively, you can use an external encoder to increment and decrement the internal 32-bit counter, to use later within the application.

Real time motion parameter control

All motion parameters are accessible before, during, and after any move. Position, velocity, acceleration, Kp, Kd, Ki, Kl, Kv, Ka, and Kg can all be changed continuously during motion. No stopping is necessary for perfect 32-bit profiling.

Stepper replacement and substitution
With SmartMotor, you can dramatically increase throughput on machines that use traditional stepper or micro-stepper motors by replacing existing stepper axes. You can also replace the traditional drive-amplifier combination seamlessly by routing step and direction signals from the existing motion indexing system directly to the SmartMotor.

Cam following
SmartMotor allows you to load a cam table for high speed cam following with interpolation between table entries.

Networking
Multi-node networking
Multiple axes of up to 100 SmartMotors can be networked together using RS485 adapters without the usual hassle of encoder and drive cables. Additionally, you can connect all home and limit sensors directly to the motors themselves, so cabling is reduced to an unprecedented level of simplicity.

Device connectivity
The SmartMotor has internal analog and digital Input/Output and can also use the AniLink port to provide access to extended I/O. The SmartMotor supports RS232, RS485, ProfiBus, DeviceNet, and AniLink protocols.

Intelligent communications
You can use the SmartMotor's second RS485 port to communicate with intelligent peripherals like MFCs, light curtains, bar code readers, absolute encoders, or additional SmartMotors. When you have configured baud rate, bit, and parity parameters to your specifications, the SmartMotors can communicate with virtually any serially addressable device!

Standards
CE certification
Most SmartMotors are CE certified. During the overall machine certification process, this assurance can be a critical advantage.

Complete access to all diagnostics
You can access all input, output, and internal status information through pre-defined variable names for program monitoring and control. The diagnostic information is available for serial polling as well, and includes such information as bus voltage, internal temperature, and instantaneous current and input status. You can program the SmartMotor to signal preventive warnings or faults based on this gathered data. Or you can prompt an operator to lubricate a ball screw, clear a jam, or perform preventive maintenance before damage occurs and you lose productivity.

Battery operation
SmartMotor electronics are CMOS and the amplifier is exceptionally efficient, making it an excellent choice for battery or remote operation.

Software Support
Circular interpolation and contouring
Circular interpolation and contouring are now easy thanks to the SmartMotor’s advanced communications format combined with a new micro-interpolation function. Animatics provides host drivers and CNC G-Code interface programs for the host PC. Use either of Animatics’ two software applications to perform linear, circular, even helical interpolation, including M-Code support. This makes the SmartMotor perfect for applications like milling, laser or water jet cutting, routing, and turning. SmartMotors do it all without a cabinet full of controls or an expensive, customized CRT.

Configuration duplication
The SmartMotor’s unique digital programming methodology ensures that you can download and duplicate each system’s tuning and performance parameters exactly. Once you have created a successful prototype, you can download the same data to each motor and never tune a servo again, even in production. Using Animatics motion control software, you can be assured of consistent and precise performance and throughput from machine #1 to machine #101.

Application development using SMI 2.0
All SmartMotors come with a terminal program, a program editor, and a source level debugger. You can install the software from a CD-ROM or from the Animatics website.
To program your SmartMotor, simply write your code, test it, and download it to the configured SmartMotor. When you reboot your SmartMotor, your program goes to work. You can monitor and modify system parameters in real time, all from one screen. The Windows-based user interface comes with source code compatible with a variety of different host and embedded applications in BASIC and C programming languages.

   
links
- Accu-Sort
- Advantech
- Alpha Gearing
- Ametek
- ANDON Boxes
- Animatics
- Aro
- Aromat
- Baldor
- Balogh
- Balluff
- Banner
- Break-A-Beam
- Contrex
- Danfoss
- Dongan
- Electra Gear
- Electrol
- EXOR
- Federal Signal
- Fincor
- Finder Relays
- Formsprag
- Furnas-Siemens
- Gemco
- Haewa
- Hammond
- Hub City
- IMS
- InterlinkBT
- Item
- K-B Electronics
- Kubler
- Larco
- Magne Power
- Mead
- Meltric
- Mijno
- Moeller Electric
- Morat
- Newton Labs
- Neugart
- Nexen
- Omron
- Oriental Motors
- Panasonic
- Patriot Sensors
- Perfection Gear
- Red Lion
- Rollon
- STM
- Saftronics
- SECO
- Sentrol
- SEW Eurodrive
- Shimpo
- Siemens
- Simco Static
- Static Controls
- Superior Electric
- Sunx
- TURCK
- WAGO
- Warner Electric
- T.B. Woods
- Xycom
- Zero Max

adBanner
HOME  |   Contact Us  |   About Simco  |   Our Products  |   Our Manufacturers