adBanner

HOME  |   Contact Us  |   About Simco  |   Our Products  |   Our Manufacturers  
 
 
LINKS
Formulas to assist in drive selection
Alpha Gear
Panasonic
IMS MicroLynx
FLEX Drive
Eurodrive
 
GO TO:
SENSORS
MOTION CONTROL
MACHINE VISION
CONTROLS
MACHINE SAFETY

1:1 Ratio Right Angle WGE
Servo-Gearhead from NEUGART

WGE40
Torque Rating (Nm)(lbin): 2.5 (22.1)
Backlash (ang. min): <25
Efficiency: 97%
Weight: (kg)(lb): 0.25 (0.6)
Max Input rpm: 6500
Mean Input rpm: 3000

WGE60
Torque Rating (Nm)(lbin): 5 (44.25)
Backlash (ang. min): <23
Efficiency: 96%
Weight: (kg)(lb):1 (2.2)
Max Input rpm: 6000
Mean Input rpm: 3000

WGE80
Torque Rating (Nm)(lbin): 12.5 (110)
Backlash (ang. min): <19
Efficiency: 96%
Weight: (kg)(lb): 2.2 (4.9)
Max Input rpm: 6000
Mean Input rpm: 3000

Dimensions mm (in)   WGE40 WGE60

WGE80

D1 Bolt hole circle   44 (1.732) 65 (2.559) 90 (3.543)
D2 Mounting hole thread size 4x M4 x 6 M5 x 8 M6 x 10
D3 Shaft diameter h7 10 (0.393) 14 (0.551) 20 (0.787)
D4 Pilot diameter h7 35.5(1.397) 53 (2.086) 71 (2.795)
D5 Pilot diameter h7 37 (1.456) 55 (2.165) 73 (2.874)
L1 Key length   18 (0.708) 25 (0.984) 28 (1.102)
L2 Distance from shaft end   2.5 (0.098) 2.5 (0.098) 4 (0.157)
L3 Shaft length to collar   23 (0.905) 30 (1.181) 36 (1.417)
L4 Shaft length to face   22.2 (0.847) 31.5 (1.24) 38 (1.496)
L5 Pilot length   3 (0.118) 7.3 (0.287) 9 ( 0.354)
L6 Pilot length   2.2 (0.087) 3 ( 0.118) 3.5 ( 0.1377)
B1 Key width   3 ( 0.118) 5 ( 0.196) 6 ( 0.236)
H1 Key + shaft height   11.2 (0.44) 16 (0.629) 22.5 (0.885)
H2 Height to CL   20 (0.78) 30 (1.181) 40 (1.574)
H3 Height CL Housing top   29 (1.141) 39.5 (1.555) 48 (1.889)
W1 Housing width   40 (1.574) 60 (2.362) 80 (3.149)
W2 Width side to CL   20 (0.78) 30 (1.181) 40 (1.574)
W3 Width CL to front   25 (0.984) 35 (1.377) 44 (1.732)
Max. Input shaft diameter h7 8 (0.314) 11 (0.433) 19 (0.748)